|
PRODUCT INFORMATION- Sleeve Anchors are suitable for fixing to Concrete, Solid Block, Solid Brick and Grout Filled Block,
- Sleeve Anchors are pre assembled single unit sleeve,
- The Sleeve Anchor diameter as the same as that for the hole which eliminates layout or hole spotting,
- When the Sleeve Anchor is tightened, the specially tapered bolt is drawn into the expansion sleeve to develop a locking action against the walls of the hole,
- Material Specifications Anchor Bolt, Washers & Nuts AISI 1018. Expansion Sleeve AISI 1010
Installation Instructions- Using the correct diameter drill bit, drill as hole into the base material to a depth of at least 13mm or one anchor diameter deeper than the required embedement required,
- Blow the hole clear of dust and other material,
- Drive the Sleeve Anchor through the fixture into the anchor hole until the head is firmly seated against the fixture. Ensure anchor is driven to the correct anchor depth,
- Tighten the anchor by turning the head 3 to 4 turns or by applying the guide installation torque from the finger tight postion.
Size (mm) | Drill (mm) | Fixture Clearance (mm) | Embed Depth (mm) | Fixture Thickness (mm) | Box Qty | 6.5 x 20 | 6.5 | 8 | 18 | 2 | 100 | 6.5 x 25 | 6.5 | 8 | 20 | 5 | 100 | 6.5 x 35 | 6.5 | 8 | 30 | 5 | 100 | 6.5 x 55 | 6.5 | 8 | 30 | 25 | 100 | 6.5 x 75 | 6.5 | 8 | 30 | 45 | 100 | 8 x 40 | 8 | 10 | 35 | 5 | 100 | 8 x 65 | 8 | 10 | 35 | 30 | 50 | 8 x 85 | 8 | 10 | 35 | 50 | 50 | 10 x 40 | 10 | 12 | 34 | 6 | 50 | 10 x 50 | 10 | 12 | 40 | 10 | 50 | 10 x 60 | 10 | 12 | 40 | 20 | 50 | 10 x 75 | 10 | 12 | 40 | 35 | 50 | 10 x 95 | 10 | 12 | 40 | 55 | 50 | 10 x 120 | 10 | 12 | 40 | 80 | 50 | 12 x 60 | 12 | 14 | 50 | 10 | 50 | 12 x 75 | 12 | 14 | 50 | 25 | 25 | 12 x 100 | 12 | 14 | 50 | 50 | 25 | 12 x 130 | 12 | 14 | 50 | 80 | 25 | 16 x 65 | 16 | 18 | 55 | 10 | 25 | 16 x 110 | 16 | 18 | 55 | 55 | 10 | 16 x 145 | 16 | 18 | 55 | 90 | 10 | 20 x 75 | 20 | 22 | 60 | 15 | 10 | 20 x 105 | 20 | 22 | 60 | 45 | 10 | 20 x 150 | 20 | 22 | 60 | 90 | 10 |
|
|
 |
|